9
【
1
】
RJ45 Network cable
Connect an Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the network connector.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
•
When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply.
•
When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
Cables
【
1
】
RJ45 Network cable
Ethernet cable (category 5e
or better, straight, 4 pairs (8 pins))
【
3
】
Audio input cable (white)
【
4
】
Audio output cable (black)
【
5
】
4P alarm cable (accessory)
【
2
】
2P power cable (accessory)
12 V DC (red)
GND (black)
【
5
】
EXT I/O cable
【
2
】
Power supply cable
【
6
】
MONITOR OUT terminal
(factory shipment: NTSC monitor)
Parts and functions
