9
[1] RJ45 Ethernet cable
Connect an RJ45 Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the camera.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE+ / PoE device in use is compliant with IEEE802.3at / IEEE802.3af
standard.
• When connecting both the 12 V DC power supply and the PoE+ / PoE device for power supply,
12 V DC will be used for power supply.
• When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE+ / PoE
device.
Parts and functions
■
Cables
The following are descriptions when using the model WV-U65302-Z2.
[3]
Audio in
(white)
[4]
Audio out
(black)
< 1 m {3.28 feet} (Mic)
< 10 m {32.8 feet} (Line)
< 10 m {32.8 feet}
ALARM IN2 (red)
GND (black)
12 V DC (red)
GND (black)
ALARM IN3 (gray)
ALARM IN1 (green)
[1]
RJ45 Ethernet cable
category 5e or better, straight, 4 pairs (8 pins)
<100 m {328 feet}
RJ45 network terminal
[2]
2P power cable
(WV-QCA501A accessory)
[5]
4P alarm cable
(WV-QCA501A accessory)
I/O Cable connection terminal
[2]
Power supply
cable
[5]
EXT I/O
cable
