background image

1

Installation Guide

Included Installation Instructions

Network Camera

Model No.

WV-S61501-Z1

WV-S61301-Z2

WV-S61301-Z1

WV-U61301-Z2

WV-U61301-Z1

About the user manuals 

Product documentation is composed of the following documents.

• 

Installation Guide (this document):

 Provides information about “Precautions”, 

“Precautions for installation” and the installation method.

• 

Basic Information (Refer to the link on the following product information website):

 Provides 

information about “Precautions for use”, “Parts and functions” and “Detail specifications”.

• 

Operating Instructions (Refer to the link on the following product information website):

 

Explains how to perform the settings and how to operate this camera. 

https://i-pro.com/global/en/surveillance/training-support/documentation-database-list

“<Control No.: C****>” used in these documents should be used to search for information on 

our technical information website (https://i-pro.com/global/en/surveillance/training-support/

support/technical-information) and will guide you to the right information.

• Before attempting to connect or operate this product, please read these instructions 

carefully and save this manual for future use.

• microSDXC/ microSDHC/ microSD memory card is described as microSD memory card.
• The external appearance and other parts shown in this manual may differ from the actual product within the 

scope that will not interfere with normal use due to improvement of the product.

Indoor use

For professional use only

NOTE:

 This equipment has been tested and found 

to comply with the limits for a Class A digital device, 
pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against 
harmful interference when the equipment is operated 
in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to 
radio communications.
Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the 
user will be required to correct the interference at his 
own expense.

FCC CAUTION:

 Changes or modifications not 

expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the 
equipment.

Supplier’s Declaration of conformity

Trade name : i-PRO
Model No. :  WV-S61501-Z1 

WV-S61301-Z2/ WV-S61301-Z1 
WV-U61301-Z2/ WV-U61301-Z1

Responsible Party : 
i-PRO Americas Inc.
8550 Fallbrook Drive, Suite 200 Houston,
Texas 77064
Support Contact : 1-800-513-5417

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

This device complies with part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, 
and (2) this device must accept any interference 
received, including interference that may cause 
undesired operation.

For U.S.A. 

The model number and serial number of this prod-
uct may be found on the surface of the unit.
You should note the model number and serial num-
ber of this unit in the space provided and retain this 
book as a permanent record of your purchase to aid 
identification in the event of theft.
  Model No. 
  Serial No.

For U.S.A.

Méthode d’installation

Vis de fixation recommandée

La capacité de traction minimale requise

Quand la caméra vidéo est directement 

installée au plafond ou sur le mur.

M4 or M6 x 16 mm {5/8 pouces} 

/ 4 él.

196 N {44 lbf}

*  La longueur de la vis est un exemple lors de l’installation de la caméra au plafond ou sur un mur robuste d’une 

épaisseur de 20 mm {25/32 pouces} ou plus.

Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used 
electrical and electronic products and batteries must not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to 
applicable collection points in accordance with your national legislation.
By disposing of them correctly, you will help to save valuable resources and prevent any potential 
negative effects on human health and the environment.
For more information about collection and recycling, please contact your local authority.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it complies with the 
requirement set by the Directive for the chemical involved.

Precautions ........................................................ 2
Open source software ........................................ 3
Copyright ........................................................... 3
Trademarks and registered trademarks ............... 3
Precautions for installation .................................. 3
Troubleshooting .................................................. 3

Specifications. .................................................... 4
Optional accessories .......................................... 4
Standard accessories ......................................... 4
Other items that are needed (not included) ......... 4
Installation Procedure ......................................... 5

Contents

© i-PRO Co., Ltd. 2022

N0422-2122

PGQP3606XA

WV-S61301-Z2

Tokyo, Japan
https://www.i-pro.com/

Authorised Representative in EU:

i-PRO EMEA B.V.

Laarderhoogtweg 25, 1101 EB 

Amsterdam, Netherlands

i-PRO EMEA B.V.  UK Branch

1010 Cambourne Business Park, 

Cambridgeshire CB23 6DP

Содержание WV-S61301-Z1









Отзывы: