9
Parts and functions
The following are descriptions when using the model WV-S2536LN.
Cables
I/O Cable
WV-QCA501A (option)
[1]
Ethernet cable (category 5e
or better, straight, 4 pairs (8 pins))
[3]
Audio input cable (white)
[4]
Audio output cable (black)
[5]
4P alarm cable
(WV-QCA501A accessory)
[2]
2P power cable
(WV-QCA501A accessory)
12 V DC (red)
GND (black)
[2]
Power supply cable
[5]
EXT I/O cable
[6]
MONITOR OUT terminal
(factory shipment: NTSC monitor)
I/O Cable
WV-QCA501A (option)
[1]
Ethernet cable
[1] Ethernet cable
Connect an Ethernet cable (category 5e or better, straight, 4 pairs (8 pins)) to the camera.
IMPORTANT:
• Use all 4 pairs (8 pins) of the Ethernet cable.
• The maximum cable length is 100 m {328 feet}.
• Make sure that the PoE device in use is compliant with IEEE802.3af standard.
•
When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply.
•
When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
