121
53. About settings that are not applied when restoring setup data
(Operating Instructions - Maintenance of the camera [Maintenance] -
Settings data/backing up or restoring logs [Data])
A note description has been added regarding function settings that are not applied when
settings data is restored.
Restore
•
[Setup data]
Press the [Choose File] button and select the setup data files to restore.
Click the radio button to select whether to also restore network related settings.
Click the [Execute] button to start restoring. The camera will restart when restoration is
complete, so do not perform operations until restoration is complete.
Make sure that the file name of the setup data used when restoring is “model name.dat” (the
model name must be in lowercase letters and “WV-” is not required).
Default: Restore all settings except the network settings.
IMPORTANT
• If more than 5 minutes is required to restore the setup data, the restoration may have failed
due to communication disconnections or other reasons.
In this case, perform restoration again.
Note:
• Restore operations for setup data are not applied to IEEE 802.1X related settings.
• Restore operations for setup data are not applied to the following network related settings.
– [Line speed]
– [Transmission data volume control (Bit rate)]
• Restore operations for setup data are not applied to UPnP related settings.
• Restore operations for setup data are not applied to HTTPS related settings (including CA
Certificate and CRT key).
• Restore operations for setup data are not applied to extension software related settings.
av0921-2093
PGQQ1494MA
