118
48. Change the default of the preset sequence
(Operating
Instructions
- Configure the settings relating to PTZ [PTZ] -
Configure the settings relating to the positions [Position] - Configure the
settings relating to the preset sequence (“Preset sequence” setup menu))
The default of
the
preset sequence setting has been changed to “All enabled”.
Preset sequence setting
Preset sequence 1, Preset sequence 2, Preset sequence 3
Preset sequences can be set.
• [Select all] button: Selects all preset positions.
• [Cancel all] button: Cancels all selections.
• 1 - 256: Enables/disables the corresponding preset position.
• [Set] button: Saves the setting of the created preset sequence.
Default: All are enabled (only registered preset positions operate)
