background image

Preface

This smoke type dome cover is used to install the indoor use dome-type monitoring camera.
For the latest information about the supported cameras, refer to our support website
(https://i-pro.com/global/en/surveillance/training_support/support/technical_information<Control 
No.:C0501>).

Specifications

Ambient operating temperature:

–10 °C to +50 °C {14 °F to 122 °F}

Dimensions: 

Diameter         : 92 mm {3-5/8 inches}

Height           : 49.3 mm {1-15/16 inches}

Diameter of the dome : 40.1 mm {1-19/32 inches}

Mass:

Approx. 25 

g

 {0.06 lbs}

Finish:

Acrylic resin, Smoke (transparency: approx. 30 %)

Precautions

 

„

Refer installation work to the dealer.

Installation work requires technique and experience. Failure to observe this may cause fire, electric 
shock, injury, or damage to the product.
Be sure to consult the dealer.

Standard Accessories 

Operating instructions (this document) .......................................................................................1 pc.

Installation 

Read the following descriptions together with the Installation Guide of the camera.

Note

:

• When a smoke type dome cover is used, the IR LED irradiation distance and the illuminance 

level are lower than for a standard clear type dome cover.  

Check the settings after attaching the enclosure. 

Enclosure fixing screw
 (2 places)

Step2

Step3

Step4

Note

:

• The dome cover is locked using the enclosure 

hooks (3 parts). Remove one hook at a time 

while pushing the dome cover inwards.

Note

:

• Remove the protection film of 

WV-CF5SA once. After replacing 

the dome cover, attach it again.

• When replacing the dome cover, 

be careful not to scratch the 

outside or inside of the dome 

cover.

IMPORTANT:

•  When the enclosure is attached, the camera’s focus may go out of focus. Use the "Auto focus" 

function in the setup menu to adjust the focus.

•  Remove the cover film after installation is complete.
•  Use lens cleaning paper (used to clean camera or spectacles lenses) to remove any dirt or 

fingerprint on the dome cover.

After installation is complete, attach the enclosure to the camera.

The Installation Guide of the camera.
https://i-pro.com/global/en/surveillance/documentation_database

0.24 N·m

{0.18 lbf·ft}

Dustproof sheet fixing screw (2 pcs.)

Dustproof sheet

Dome cover

Dustproof sheet

Step 2

WV-CF5SA
Dome cover
(smoke)

Dustproof sheet fixing screw (2 pcs.)

Step 2

Step1

© i-PRO Co., Ltd. 2022 

N0521-1042       PGQX2454YA

i-PRO Co., Ltd.

https://www.i-pro.com/

Operating Instructions

Included Installation Instructions

Dome Cover

Model No.

WV-CF5SA

• Before attempting to connect or install this product, please read these instructions carefully and 

save this manual for future use.

• The external appearance and other parts shown in this manual may differ from the actual product 

within the scope that will not interfere with normal use due to improvement of the product.

Отзывы: