63
Configure the settings relating to the user
management [User management]
The settings such as user authentication On/Off, administrator registration and operation levels can be
configured on the setup menu - the "Advanced setup" menu - the "User management" page.
The "User management" page has [Basic], [User registration], [Administrator setup] and [Host registration] tabs.
Configure the basic settings relating to user management
[Basic]
The settings relating to login when using the mouse, user authentication for network operations, and user levels
can be configured on this tab.
■
Operation
Configure the settings to enable auto login when
turning on the recorder.
[Auto login]
Select "On" or "Off" to determine whether or not to
activate the auto login function.
On: Logs in to the recorder automatically.
Off: Does not log in to the recorder automatically.
Login is required when operating the recorder
from the logout status.
Default:
On
[Auto login user]
When "On" is selected for "Auto login", the users
registered as auto login users in this setting can log in
to the recorder automatically. An auto login user
should be one of the users registered in the recorder.
Default:
(Administrator)
[Quick login]
Select "On" or "Off" to determine whether to enter or
select the user name.
Off: User name needs to be entered.
On: Login by selecting a displayed user name.
Default:
Off
[Auto logout]
Set the time to wait until auto logout when no
operations are made while displaying live images.
Off: Does not logout to the recorder automatically.
After 1 min/ After 3 mins/ After 5 mins/
After 30 mins
Default:
Off
Note:
• When "On" is selected for "Auto login", the user
will not be logged out automatically even if other
values than "Off" is selected for "Auto logout".
When logout is performed (
☞
will be automatically performed by the user
registered in "Auto login user".
• To prevent inappropriate operations, it is
recommended to select settings other than "Off"
for "Auto logout".
■
Network
Determine whether or not to require user
authentication for operating the recorder from a PC.
[User authentication]
Select "On" or "Off" to determine whether or not to
authenticate the user.
On: Login followed by user authentication
Off: Login without user authentication
Default:
On
[Host authentication]
Determine whether to enable or disable the host
authentication.
On: Login followed by host authentication.
Off: Login without the host authentication.
Default:
Off
[Setup via recorder's main monitor]
