EMS i-MO 210 C Series Hardware Installation Guide
Version
1.0
ELECTRONIC MEDIA SERVICES LIMITED
1st Floor, Building 51, Whitehill & Bordon Enterprise Park, Budds Lane, Bordon, Hampshire, GU35 0FJ
Tel:
01428 751655 |
Fax:
01428 751654 |
E-mail:
Page
9
of
16
5) How to attach the power cable
The appliance is powered by an AC Adapter power supply. Do
NOT
connect the power supply to the mains
yet. Please insert the power cable as shown below. Now connect power supply to mains.
Note
: We recommend the use of UPS units where power regulation cannot be guaranteed (e.g. use of a
generator)
6) How to switch the power On or Off
The power button at the front of the unit is used to turn the appliance on (boot) or off (shutdown). As soon as
the button is pressed it will illuminate to show that the appliance is powering up. Press the button again to
start the power off sequence.
Note
: Do
NOT
hold the power button in unless specifically instructed to do so by a support engineer.