i-JMB WC-017, Инструкция по эксплуатации

Страница: 8 / 16

Applicable Devices:
All devices ( smartphones or earbuds) that support Qi standard for wireless charging. Ensure your device is
compatible. If a non‐QI compatible device is used the charger may overheat. Please check your device
specifications
Instructions:
5. Plug USB port into power adapter (not included) and then insert Type‐C end into wireless charger.
6. There are 3 LED indicators on the front of panel. Middle color is for indicating wireless charger connecting
with AC source and the two side ones are for indicating that the mobile phones are connecting with the
wireless charger correctly.
7. Place your phones on the wireless charger. Make sure that the phone is well located at the middle of the
charging area of the wireless charger. The middle indicator shows that the wireless charger is connected to
the AC source and has a red colour. The two side indicators are for the two sides of the wireless charging pad.
Put mobile phones right on the middle of one of the side charging panels and the corresponding indicator
will show blue color. When mobile phone is fully charged, the blue color will turn off automatically.
8. Total output is 20W. For each charging panel, the output will be 10W.
Safety Information:
Please keep the charger away from water or other liquid.
If you need to clean the charger, please make sure it is power off.
Using Environment temperature: 1 ‐ 45 degree.
Ensure your device is compatible. If a non‐QI compatible device is used the charger may overheat.
When the phone is not placed on the charging surface correctly, your phone may not charge properly.
The thickness of the protective case you fit to your phone may affect the units charging ability. If it is over 5mm thick
or made of metal, has decorative studs or magnetic plates or clasps we suggest you remove the cover before placing
your device on the charging pad to ensure a stable connection. Ensure the case does not create a distance between
the charging pad and the back of the phone that is greater than 6 mm
To avoid damage to your device through overheating do not use your device whilst charging.
Do not place anything other than QI enabled phones on the charger.
Always take the device off the charging pad after full charge to prevent damage to device and/or wireless charger.
Do not leave unattended when charging
Not suitable for smart watches as some types have temperature controls which stop charging automatically above
certain temperatures
The lower the ambient temperature, the faster the charging speed. The charging speed in winter is faster than in
summer
8