Device Overview
How to wear your Q-Watch?
User Manual
Q-70
Q-Watch
EN
Wear Q-Watch on your wrist
1
2
3
4
Charge your Q-Watch
Fasten Q-Watch with clasp
Change the watch band
Put on the watch with the watch face facing up and wrap the
band around your wrist. Align the clasp end with the holes on
the band to measure the best fit on your wrist.
Fasten the clasp through the appropriate holes on the band. Try
it out on your wrist for best fit and adjust accordingly.
To charge your Q-Watch, place it in the charging box at the
other end of the USB cable. Close the box afterwards, and
make sure the Q-Watch is securely covered. Plug the USB
connector to either a PC or power adapter to start charging.
Spread open both bands with the watch face facing up, and stretch
open the two straps that hold around the watch crown for the
watch to come off.
From below the band, insert the watch with face facing up into the
stretchable center area of the band and make sure the watch crown
is positioned in between the two rubber straps. Button up the clasp
back on the band with two holes.
Use the plastic rod to detangle the rubber straps that hold around
the watch crown to help secure the watch in position.
1.
2.
Note:
Wristband
Clasp
Core
Plastic rod
Button
Metallic contact for charging
1
2
3
1
2
