i-data Electronic Documentation
ida 812-1x MIO
Operator’s Guide
Doc. no D60222
Revision 01
i-data international a-s • Vadstrupvej 35-43 • 2880 Bagsværd • Denmark
Phone: +45 44 36 60 00 • Fax: +45 44 36 61 11 • WWW: http://www.i-data.com • E-mail: [email protected]
WARNING:
This equipment generates, uses, and can radiate radio frequency energy and if not installed and used
in accordance with the instruction manual, may cause interference to radio communications. It has
been tested and found to comply with the limits for a Class B computing device pursuant to Subpart J
of Part 15 of FCC Rules, which are designed to provide reasonable protection against such inter-
ference when operated in a commercial environment. Operation of this equipment in a residential
area is likely to cause interference in which case the user at his own expense will be required to take
whatever measures may be required to correct the interference.
EMC
directive
:
Only if installed in a printer with metal casing will this product observe the rules and regulations of the
EMC directive. If so required, a declaration of conformity in local language stipulating the applied
rules and regulations can be obtained.
Trademarks:
Company and product names mentioned in this datasheet are trademarks or registered trademarks of
their respective owners. i-data international a-s cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to products and documentation without
prior notification.
The i-data Printing Solutions
