i-box Awake, Руководство пользователя

Страница: 6 / 48

06 | Awake
Powering your Radio Alarm Clock
To power the i-box Awake alarm clock, plug the power adaptor (supplied) into a wall socket and the jack plug into the DC
In port on the back of the Awake (13).
DC IN 9V
OUTPUT 5V
CR2025
3V
OLT
S LITHIUM BAT
TE
RY
Battery Backup Installation
1 x CR-2032 battery is installed in the battery compartment (24) to provide a backup power supply. If the mains supply
is disconnected or interrupted this backup power supply ensures that the time and alarm settings are saved but does not
power any other functions (e.g. Radio or display). Remove the plastic tab as shown below to activate the battery.
Replacing the battery
Setting the Clock
Long press the / Clock Key (9) to start setting the time manually.
Standby Mode and Mode Select
Long Press the Standby / Function Mode key (10) to enter Standby. Short press the Standby / Function Mode key
(10) to enter playback mode and select mode (FM or BT).
Set the Time Display Format - 24 hour clock (military time) or 12 hour (AM/PM)
Set the Time - Hour and Minutes
00:00
00:00 13:00 13:00 13:32
13:32 13:33
98.2
FM BT
24H 12H 24H
Before getting started
Before setup or making connections please extend the antenna fully.
DC IN 9V
OUTPUT 5V
Help
Short Press
Long Press
CR2025
3V
OLT
S LITHIUM BAT
TE
RY
CR2025
3V
OLT
S LITHIUM BAT
TE
RY