background image

0-3

3.  CONVERSION TABLE

3.  CONVERSION TABLE

Method of using the Conversion Table
The Conversion Table in this section is provided to enable simple conversion of figures.   For details of 
the method of using the Conversion Table, see the example given below.

Example

Example

Method of using the Conversion Table to convert from millimeters to inches

Method of using the Conversion Table to convert from millimeters to inches
Convert 55mm into inches.

Locate the number 50in the vertical column at the left side, take this as 

, then draw a    

horizontal line from 

.

Locate the number 5in the row across the top, take this as 

, then draw a perpendicular line 

down from 

.

Take the point where the two lines cross as 

.   This point 

 gives the value when converting 

from millimeters to inches.   Therefore, 55mm = 2.165 inches.

Convert 550mm into inches.

The number 550 does not appear in the table, so divide by 10(Move the decimal point one place  

 

to the left) to convert it to 55mm.

Carry out the same procedure as above to convert 55mm to 2.165 inches.

The original value(550mm) was divided by 10, so multiply 2.165 inches by 10(Move the decimal 
point one place to the right) to return to the original value.   
This gives 550mm = 21.65 inches.

1.

1.

2.

(1)

(2)

(3)

(1)

(2)

(3)

Millimeters to inches

Millimeters to inches

1mm = 0.03937 in

 

  0 1  2  3 4 5  6 7 8  9 

 0 

 

0.039  0.079  0.118 0.157 0.197  0.236 0.276 0.315  0.354

 

10  0.394 0.433  0.472  0.512 0.551 0.591  0.630 0.669 0.709  0.748

 

20  0.787 0.827  0.866  0.906 0.945 0.984  1.024 1.063 1.102  1.142

 

30  1.181 1.220  1.260  1.299 1.339 1.378  1.417 1.457 1.496  1.536

 

40  1.575 1.614  1.654  1.693 1.732 1.772  1.811 1.850 1.890  1.929

 

 

50  1.969 2.008  2.047  2.087 2.126 2.165  2.205 2.244 2.283  2.323

 

60  2.362 2.402  2.441  2.480 2.520 2.559  2.598 2.638 2.677  2.717

 

70  2.756 2.795  2.835  2.874 2.913 2.953  2.992 3.032 3.071  3.110

 

80  3.150 3.189  3.228  3.268 3.307 3.346  3.386 3.425 3.465  3.504

 

90  3.543 3.583  3.622  3.661 3.701 3.740  3.780 3.819 3.858  3.898

Find manuals at https://best-manuals.com

Содержание Robex R145CR-9










































Отзывы: