Hyundai N800 Series, Руководство по установке

Страница: 72 / 102

5. CONTROL UNIT
66
5.3.2 USING FIELDBUS THROUGH AN RS485 CABLE
Table 28: RS485 cable data
1) Remove approximately 15 mm of the grey shield of the RS485
cable. Do this for the 2 fieldbus cables.
a) Strip the cables for approximately 5 mm to put them in the
terminals. Do not keep more than 10 mm of the cable
outside the terminals.
b) Strip the cable at such a distance from the terminal that you
can attach it to the frame with the cable clamp. Strip the cable
at a maximum length of 15 mm. Do not remove the aluminium
shield of the cable.
The plug type
The cable type
The cable length
2.5
㎟
Item Desctiption
STP (shielded twisted pair), Belden 9841 or almost
the same
So that it agrees with the fieldbus. See the fieldbus
manual.
N800A