9
WARNING
Seek assistance when removing the compressor from its packaging.
3.0
Remove the compressor from its packaging and inspect for any damaged parts.
If anything is found to be missing or damaged, contact your supplier.
3.1
Take care to transport the compressor correctly, do not overturn it or lift it with hooks
or ropes.
3.2
Position the compressor on a flat, level surface or with a maximum permissible
inclination of 10°.
3.3
Site in a well-ventilated area.
3.4
If the surface is inclined and smooth, check if the compressor moves whilst in operation.
3.5
If the surface is in a raised position, make sure the compressor cannot fall, securing
it in a suitable way.
3.6
To ensure good ventilation and efficient cooling, the compressors belt guard must be
at least 200cm from any wall.
3.7
Before using the compressor, check the oil level by looking at the sight gauge as
shown below.
If the oil is not between the minimum and maximum mark, it should be topped up with
oil.
We do not recommend using mineral oil in the compressors.
3.8
Check the engine oil level. It should be filled with semi-synthetic SAE 15W40 engine oil
to the top of the filler neck.
3. PREPERATION
Fill Oil To This Level
Oil Filler Cap /Dipstick
Oil Filler Neck
Oil Drain Plug
