Hyundai HY30100, Руководство пользователя

Страница: 10 / 24

PAGE 10 Rev 2
4.12 Maintain compressor with care. Follow instructions for lubricating. Inspect power
leads periodically and if damaged, have repaired by authorised service facility. Inspect
extension leads periodically and replace if damaged.
4.13 Outdoor extension leads. When compressor in used outdoors, use only extension leads
intended for use outdoors and so marked.
4.14 Stay alert. Watch what you are doing. Use common sense. DO NOT operate compressor
when you are tired. Compressor should never be used by you if you are under the influence of
alcohol, drugs or medication that makes you drowsy.
4.15 Check for damaged parts and air leaks. Before using the compressor, if a guard or other
part is damaged it should be carefully checked to determine that it will operate properly and
perform its intended function.
Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, air
leak, and any other conditions that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced by an authorised service centre unless
otherwise indicated elsewhere in this instruction manual. Have defective pressure switches
replaced by authorised service centre. DO NOT use compressor if switch does not turn it on
and off.
4.16 Handle compressor correctly. Operate the compressor according to the instructions
provided herein. Never allow the compressor to be operated by children, individuals unfamiliar
with its operation or unauthorised personnel.
4.17 Keep all screws, bolts and covers tight and in place. Keep all screws, bolts, and covers
tightly mounted. Check their condition periodically.
4.18 Keep motor vent clean. The motor air vent must be kept clean so that air can freely
flow at all times. Check for dust build-up frequently.
4.19 Always operate compressor at its rated voltage. Operate the compressor at voltages
specified on their nameplates. If using the compressor at a higher voltage than the rated
voltage, it will result in abnormally fast motor revolution and may damage the unit and burn
out the motor.
4.20 Never use a compressor which has defects or is operating abnormally. If the compressor
appears to be operating unusually, making strange noises, or otherwise appears defective,
stop using it immediately and arrange for repairs by a authorised service centre.
4.21 DO NOT wipe plastic parts with solvents. Solvents such as petrol, thinners, benzene,
carbon tetrachloride, and alcohol may damage and crack plastic parts. DO NOT wipe them with
such solvents. Wipe plastic parts with a soft cloth light dampened with soapy water and dry
thoroughly.
4.22 Use only genuine replacement parts. Non genuine replacement parts may void your
warranty and can lead to malfunction and result in injuries. Genuine parts are available from
your dealer.
4.23 DO NOT modify the compressor. DO NOT modify the compressor. Always contact the
authorised service centre for any repairs. Unauthorised modification may not only impair the
compressor performance but may also result in accident or injury to repair personnel who do
not have the required knowledge and technical expertise to perform the repair operations
correctly.
4.24 Turn off the pressure switch when the compressor is not in use. When the compressor is
not it use, turn the knob of the pressure switch OFF, disconnect it from the power source and
open the drain cock to discharge the compressed air from the air tank.
4.25 Never touch hot surface. To reduce the risk of burns, DO NOT touch tubes, heads,
cylinder and motors.