14
HHC315C
5.
Plug the power cord into a properly grounded receptacle.
6.
Turn power switch to ON. Allow air compressor to reach the cut-out pressure
of 125-PSI, the air compressor will cut-out automatically.
7.
Turn the pressure regulator knob to adjust the outlet pressure, outlet
pressure is shown on the outlet pressure gauge. Set outlet pressure to the
recommended air pressure of the air tool you will be using and ensure the air
hose also supports this air pressure.
8.
The air compressor is ready for use.
4.2 STOPPING YOUR AIR COMPRESSOR
DANGER!
ALWAYS use ear and eye protection when draining the air tank,
escaping air may contain moisture and debris.
1.
Turn power switch to OFF.
2.
Unplug the power cord from receptacle.
3.
Turn regulator knob counter-clockwise until the outlet pressure gauge reads
0-PSI.
4.
Remove the attached air hose.
5.
Open the drain valve and drain all air and condensed water from the air tank.
6.
Close the drain valve.
7.
Store in a safe, dry, non-freezing area.
CLOSE
OPEN
CLOSE
CLOSE
1
2
3
OFF
4
5
6
1
2
3
OFF
OPEN
Содержание HHC315C
Страница 1: ...HHC315C User Manual...