Hyundai H-VCRS01, Инструкция по эксплуатации, Страница: 7 / 20

7
.

The device could get stuck under pieces of furniture if it does not have the necessary
clearance. Block the path e.g. with fl ower pots that are heavy enough to prevent
being knocked off.
Press On/Off switch to activate the device. Light indicator will light up blue.
Place the cleaner on the ground, after 3 sec auto operation starts.
Once robot is activated without specific settings, it follows five auto modes by
repeating 5 different movements which ensure thorough cleaning of one space or
area.
Lift device and press On/Off switch one more time to switch off it.

WARNING!

Be sure to clean the container after each cleaning.

Never use the vacuum cleaner without installed filter and with damaged or dirty
filter. Otherwise, dust will fall into the motor and cause damage to the vacuum
cleaner.

Don’t use the vacuum cleaner if the container is filled to the mark “MAX”. When the
container is filled, dirty air clogs up the vacuum cleaner filter and the engine can
overheat and disable.

Don’t use the vacuum cleaner for cleaning of material debris such as cement,
whitewash, plaster, metal shavings and etc. These particles cause to the engine
damage.

Don’t wash vacuum cleaner parts in a dishwasher or a construction machine.
Cleaning and maintenance

ATTENTION!

The device may not be connected to the mains and must be completely switched off
for cleaning and maintenance!

Only the dust bin may be rinsed out. Make sure that all parts are completely dry
before you place the dust bin back in the device!

None of the parts of the robotic vacuum cleaner are suitable for cleaning in the
washing machine or dishwasher!

When cleaning, do not use any corrosive or abrasive cleaners. They could damage
the surface.
Side brushes cleaning

Hair and debris stuck on brush should be removed from time to time. It is higly
recommended to clean the brush after 4-5 work cycles.
Dust bin cleaning

Turn the device upside down.

Hold dust bin handle and remove it

Open dust bin cover, remove the filter and empty all the debris to dust bin. Use the
included brush to wipe out the filter.

NOTE: it is forbidden to wash the filters!

Assemble the filers to their places in reverse order