Hyundai H-HV15-10-UI617, Инструкция по эксплуатации

Страница: 11 / 40

11.
Electric convector
EN
SMT mode
Press button, symbol lights, Set required temperature and compared it with room
temperature, if setting temperature and room temperature difference is 5 degrees or over 5
degrees, the product works with high power (2000W), if setting temperature and room tempera-
ture difference is over 3 degrees but not more than 5 degrees, the product works with middle
power (1200W), if setting temperature and room temperature difference is less 3 degrees, the
product works with low power (800W), if setting temperature is higher than room temperature,
the product stops heating.
Power adjustment
Low power lights, off;
Middle power, lights, off;
High power, both on.
Protection function
Sensor problem protection: Sensor off or other problem, LED shows E1, heating element stops
heating output Tip-over protection: the products tip-over 45 degrees, it stops working, flash
-
es, and the product would be under standby status.
Over-heating protection: once the whole product is overheating, thermal limiter works, the prod-
uct would be power off, LED off.
Operation voice
When valid operate any button once, buzzer ring once, after connection of power, buzzer ring
once.
Screen fade out Function
If no pressing of « » button together, all the symbols on LED would be on status.
Press « » button together, shows status of the product, other symbols off, press
any button to show working status.
Mandatory power functions
Within 2 minutes after power on of the product for the first time, SMART mode and temperature
setting function invalid, the whole product works under setting power for PCB checking of pro-
duction line.
Memory function
Thermo-limiter off and rework, tip-over switch rework and accidently electricity off, the product
will memory working status of last time.
SMT