background image

2

DRIVING YOUR HYUNDAI

26

!

!

WARNING:

Items you carry inside your vehicle
can strike and injure people in a
sudden stop or turn, or in a crash.

o Put things in the cargo area of

your vehicle. Try to spread the
weight evenly.

o Never stack items, like suitcases,

inside the vehicle above the tops
of the seats.

o Do not leave an unsecured child

restraint in your vehicle.

o When you carry something inside

the vehicle, secure it.

o Do not drive with a seat folded

down unless necessary.

NOTE:
o Overloading your vehicle may

cause damage. Repairs would not
be covered by your warranty. Do
not overload your vehicle.

o Using heavier suspension com-

ponents to get added durability
might not change your weight rat-
ings. Ask your dealer to help you
load your vehicle the right way.

The label will help you decide how much
cargo and installed equipment your
vehicle can carry.

If you carry items inside your vehicle –
like suitcases, tools, packages, or any-
thing else – they more as fast as the
vehicle goes. If you have to stop or turn
quickly, or if there is a crash, the items
will keep going and can cause an injury
if they strikes the driver or a passenger.

WARNING:

o Overloading your vehicle can

cause heat buildup in your
vehicle's tires and possible tire
failure that could lead to a crash.

o Overloading your vehicle can

cause increased stopping dis-
tances that could lead to a crash.

o A crash resulting from poor han-

dling vehicle damage, tire failure,
or increased    stopping distances
could result in serious injury or
death.

Содержание 2006 Tiburon











































































































































































































































































Отзывы: