manualshive.com logo in svg

Hyundai 2006 Tiburon, Руководство пользователя

Hyundai 2006 Tiburon - Полное руководство владельца для загрузки бесплатно. Необходимо руководство? Скачайте руководство для Hyundai 2006 Tiburon с нашего сайта. Научитесь управлять своим автомобилем без проблем с нашим подробным руководством владельца. Перейдите на manualshive.com прямо сейчас!

Поделиться
Скачать
background image

2

DRIVING YOUR HYUNDAI

13

o If your car is equipped with an automatic

transaxle, don’t let your car creep forward.
To avoid creeping forward, keep your foot on
the brake pedal when the car is stopped.

o Use caution when parking on a hill. Firmly

engage the parking brake and place the gear
selector lever in "P" (automatic transaxle) or
in first or reverse gear (manual transaxle).
If your car is facing downhill, turn the front
wheels into the curb to help keep the car from
rolling. If your car is facing uphill, turn the front
wheels away from the curb to help keep the
car from rolling. If there is no curb or if it is
required by other conditions to keep the car
from rolling, block the wheels.

o Under some conditions your parking brake

can freeze in the engaged position. This is
most likely to happen when there is an
accumulation of snow or ice around or near
the rear brakes or if the brakes are wet. If
there is a risk that the parking brake may
freeze, apply it only temporarily while you put
the gear selector lever in "P" (automatic) or
in first or reverse gear (manual transaxle)
and block the rear wheels so the car cannot
roll. Then release the parking brake.

o Do not hold the vehicle on the upgrade with

the accelerator pedal. This can cause the
transmission to overheat. Always use the
brake pedal or parking brake.

o After being parked, check to be sure the

parking brake is not engaged and that the
parking brake indicator light is out before
driving away.

o Driving through water may get the brakes

wet. They can also get wet when the car is
washed. Wet brakes can be dangerous!
Your car will not stop as quickly if the brakes
are wet. Wet brakes cause the car to pull to
one side. To dry the brakes, apply the
brakes lightly while driving slowly until the
braking action returns to normal, taking care
to keep the car under control at all times. If
the braking action does not return to normal,
stop as soon as it is safe to do so and call your
Hyundai dealer for assistance.

o Don’t coast down hills with the car out of gear.

This is extremely hazardous. Keep the car
in gear at all times, use the brakes to slow
down, then shift to a lower gear so that engine
braking will help you maintain a safe speed.

o Don’t "ride" the brake pedal. Resting your

foot on the brake pedal while driving can be
dangerous because it can result in the brakes
overheating and losing their effectiveness. It
also increases the wear of the brake com-
ponents.

o If a tire goes flat while you are driving, apply

the brakes gently and keep the car pointed
straight ahead while you slow down. When
you are moving slowly enough for it to be safe
to do so, pull off the road and stop in a safe
place.

ELECTRONIC STABILITY
PROGRAM (ESP)

C310A02JM-AAT

(If installed)

!

WARNING:

Never drive too fast for the road conditions
or too quickly when cornering.  Electronic
stability control (ESP) will not prevent acci-
dents.  Excessive speed in turns, abrupt
maneuvers and hydroplaning on wet sur-
faces can still result in serious accidents.
Only a safe and attentive driver can prevent
accidents by avoiding maneuvers that
cause the vehicle to lose traction.  Even with
ESP installed, always follow all the normal
precautions for driving - including driving
at safe speeds for the conditions.

Содержание 2006 Tiburon











































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2006 Tiburon

Eaton Green Motion DC 22 Training preview
Green Motion DC 22
Бренд: Eaton Страницы: 65
Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Бренд: Yakima Страницы: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Бренд: Yakima Страницы: 18
GMC SIERRA 2019 Getting To Know Your preview
SIERRA 2019
Бренд: GMC Страницы: 20
PUTCO MOLLE PANELS RAM 2500 Instruction Manual preview
MOLLE PANELS RAM 2500
Бренд: PUTCO Страницы: 4
Westfalia Portilo 350000 Installation And Operating Instructions Manual preview
Portilo 350000
Бренд: Westfalia Страницы: 18
Thule 1511 Instructions Manual preview
1511
Бренд: Thule Страницы: 8
Cadillac 2007 CTS Owner'S Manual preview
2007 CTS
Бренд: Cadillac Страницы: 518
Opel OPEL INSIGNIA Infotainment Manual preview
OPEL INSIGNIA
Бренд: Opel Страницы: 141
femkes Hopper on Top User Manual preview
Hopper on Top
Бренд: femkes Страницы: 7
TATA Motors TIGOR EV 2021 Owner'S Manual preview
TIGOR EV 2021
Бренд: TATA Motors Страницы: 236
RBO RBO4038 Product Manual preview
RBO4038
Бренд: RBO Страницы: 15
Thule 953000 Instructions Manual preview
953000
Бренд: Thule Страницы: 8
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Бренд: Summit Racing Страницы: 11
FIRRAK FIRRAK arca Assembly Instructions Manual preview
FIRRAK arca
Бренд: FIRRAK Страницы: 12
Navman N-series B2+ User Manual preview
N-series B2+
Бренд: Navman Страницы: 27
Honda 08P00-T7S-600 Installation Instructions preview
08P00-T7S-600
Бренд: Honda Страницы: 5
Prime Design VRI3-FT31B Assembly Manual preview
VRI3-FT31B
Бренд: Prime Design Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды