Hyundai 2006 Tiburon Скачать руководство пользователя страница 112

Страница: 112 / 266

FEATURES OF YOUR HYUNDAI

100

o This unit is made of precision parts. Do

not attempt to disassemble or adjust
any parts.

o When driving your vehicle, be sure to

keep the volume of the unit set low
enough to allow you to hear sounds
coming from the outside.

o Do not expose this equipment (includ-

ing the speakers) to water or excessive
moisture.

CAUTION:

o Do not insert warped or poor quality

discs into the CD player as damage to the
unit may occur.

o Do not insert anything like coins into the

player slot as damage to the unit may
occur.

o Do not place beverages close to the

audio system. The playback mechanism
may be damaged if you spill them.

o Do not impact on the audio system, or

the playback mechanism could be dam-
aged.

o Driving off-road or other vibrations may

skip your compact disc.
Do not use the audio system off-road as
the discs could be scratched and dam-
aged.

o Do not grip or pull out the disc with your

hand while the disc is being pulled into
the unit by the self loading mechanism.
These can cause poor disc scratching to
occur or trouble in the compact disc
player.

o Avoid using CD-Recordable or CD-

Rewritable to ensure proper operation.
When using the compact disc player,
genuine CDs are recommended.

Содержание 2006 Tiburon











































































































































































































































































Результаты поиска

Содержание 2006 Tiburon

Отзывы:

Похожие инструкции для 2006 Tiburon

Бренды по названию

Популярные бренды

Hyundai 2006 Tiburon, Руководство пользователя

Результаты поиска

Содержание 2006 Tiburon

Отзывы:

Похожие инструкции для 2006 Tiburon

Бренды по названию

Популярные бренды