Hyundai 2000 Accent, Руководство пользователя

Страница: 115 / 136

DO-IT-YOURSELF MAINTENANCE
G110A01A-AAT
CHECKING THE TRANSAXLE FLUID
(AUTOMATIC)
Transaxle fluid in the automatic transaxle should
be checked at those intervals specified in the
vehicle maintenance schedule in Section 5.
G110B02A-AAT
Recommended Fluid
Your Hyundai automatic transaxle is specially
designed to operate with HYUNDAI ATF SP-II
M or GENUINE DIAMOND ATF SP-II M. Dam-
age caused by a nonspecified fluid is not cov-
ered by your new vehicle limited warranty.
G110C02A-GAT
Transaxle Fluid Capacity
The fluid capacity of the automatic transaxle is
6.1 liters (6.45 U.S. quarts).
WARNING:
The transaxle fluid level should be checked
when the englne is at normal operatlng tem-
perature. This means that the englne, radia-
tor, exhaust system etc., are very hot. Exer-
clse great care not to burn yourself during
thls procedure.
Q110O01A-GAT
To Check the Transaxle Fluid Level
Park the car on level ground with the parking
brake engaged. When the transaxle fluid level
is checked, the transaxle fluid should be at
normal operating temperature and the engine
idling.
While the engine is idling, apply the brakes and
move the gear selector lever f rom "P" lo each of
its other positions — "R", "N", "D", "2", "L" —
and then retum to "N". With the engine still
idling:
1. Open the hood, being careful to keep hands,
long hair and clothing clear of any moving
parts.
2. Remove the transaxle dipstick, wipe it clean,
reinsert the dipstick as far as it will go, then
remove it again. Now check the fluid level on
the dipstick. It should be in the "HOT" range
on the dipstick.
Ruid level should be within this range
3. If the transaxle fluid level is low, use a funnel
to add transaxle fluid through the dipstick
tube until the level reaches the "HOT" range.
Do not overfill.
6-11