Hyundai power products HG4000l-A1, Оригинальное руководство пользователя

Страница: 13 / 26

5.
OPERATION
Generator Location
NEVER operate the generator inside any building,
including garages, basements, crawlspaces and
sheds, enclosure or compartment, including the
generator compartment of a recreational vehicle.
Please consult your local authority. In some areas,
generators must be registered with the local utility.
Generators used at
construction sites may be subject to additional
rules and regulations. Generators should be on a
flat, level surface at all times (even while not in
operation). Generators must have at least 5 ft. (1.5
m) of clearance from all combustible material. In
addition to clearance from all combustible
material, generators must also have at least 3 ft.
(91.4 cm) of clearance on all sides to allow for
adequate cooling, maintenance and servicing.
Generators should never be started or operated in
the back of a SUV, camper, trailer, in the bed of a
truck (regular, flat or otherwise), under staircases
/ stairwells, next to walls or buildings, or in any
other location that will not allow for adequate
cooling of the generator and/or the muffler. DO
NOT contain generators during operation. Allow
generators to properly cool before transport or
storage. Place the generator in a well-ventilated
area. DO NOT place the generator near vents or
intakes where exhaust fumes could be drawn into
occupied or confined spaces. Carefully consider
wind and air currents when positioning generator.
Failure to follow proper safety precautions may
void manufacturer’s warranty.
Grounding
The generator system ground connects the frame to the
ground terminals on the power panel.
– The generator (stator winding) is isolated from the
frame and from the AC receptacle ground pin.
– Electrical devices that require a grounded receptacle
pin connection will not function if the receptacle
ground pin is not functional.
Engine Start
1. Make certain the generator is on a flat, level surface.
2. Disconnect all electrical loads from the generator.
Never start or stop the generator with electrical
devices plugged in or turned on.
3. Turn the fuel valve to the “On” position.
4. Pull choke lever out to the “Choke” position.
5. Turn the engine switch to the “On” position.