INSTRUCTION MANUAL FOR EMERGENCY LED DRIVER
MODEL NO. : HEM02
Block A6, Nan’pu Science & Technology Park, Hao’si,
Shajing Street, Bao’an District, Shenzhen, P.R.C. 518104
T: 86 755 27322200 F: 86 755 27308687
E: [email protected] W: www.hytronik.com
CHINA FACTORY
Room D, 10/f, Tower A, Billion Center, 1 wang Kwong Road,
Kowloon Bay, Kowloon, Hongkong
T: 00852-35197525 F: 00852-30116936
E: [email protected]
HYTRONIK INDUSTRIAL LIMITED
This emergency lighting module is designed to convert a wide range of LED types, and is an ideal choice for converting
most standard LED luminaries and arrays containing from 3 to 20 (60V) LEDs in series.
This unit is designed to utilize the existing LED driver and panel layout (no need to break into the LED circuit) to be
dimmed to 3W in case of emergency.
The driver automatically adjust the output LED current to provide the best optimum match between the battery and the
load, providing maximum illumination whilst ensuring full battery duration. The driver is compatible with a wide range of
lighting LEDs.
DESCRIPTION
WIRING DIAGRAM
Luminaire Power
5W
7W
10W
12W
15W
20W
25W
30W
35W
40W
45W
50W
60%
43%
30%
25%
20%
15%
12%
10%
9%
8%
7%
6%
It is recommended that the module is installed by a competent person ensuring the installation complies with the
neces-sary standards. Hytronik accept no resonsibility for injury, damage or loss, which may arise as a result of
incorrect installation, operation or maintenance.
The conversion requires an unswitched supoly for charging the battery and a switched supply for a maintained conversion.
BALLAST LUMEN FACTOR%
IMPORTANT
