Hytera PTC760, Руководство пользователя, Страница: 52 / 94

39
5. Radio Features and Operations
5.1 Work Type (DMO Only)
The radio can switch among different work types to initiate calls or send messages. The work types are as
follows:

MS-MS: The radio directly communicates with another radio.

Repeater: The radio communicates with another radio through a repeater.

Gateway: The radio communicates with another radio through a gateway.

GW+Rep: The radio communicates with another radio through a gateway or repeater.
To select the work type, tap , and then tap Work type.
If Repeater, Gateway, or GW+Rep is selected, you need to enable Auto-select device or manually add the
device address.
5.2 Mobility Management
5.2.1 Network Switch
A network is identified by its country code and network code.
In DMO, the radio can only communicate with other radios in the same network.
In TMO, when the radio receives weak network signals or is out of service, it can switch to and register with
other available networks to continue the communication.
5.2.1.1 Manual Switch
If the radio is configured with multiple networks, you can manually switch the network.
Tap , tap Management, and then select the network from the network list.
5.2.1.2 Automatic Switch
In TMO, with Auto-switch network enabled, the radio automatically switches to another network when it is
out of service.