20
3.
Terminal Settings
Tap
to open Settings, and then you can configure the following terminal settings:
3.1
Network and Internet
3.1.1
Mobile Network
To enable Roaming, tap Network & Internet > Mobile network, and then in one SIM card interface
turn on the Roaming switch.
To select network type, tap Network & Internet > Mobile network > Advanced > Preferred network
type, and then select 2G, 3G, or 4G.
Before using the 4G network, make sure that the SIM card is enabled with the 4G service.
3.1.2
Data Usage
To view the usage of mobile data, tap Network & Internet > Mobile network > Data usage.
To set the data usage cycle reset date, data usage alarm, or data usage limit, in the data usage interface,
tap
, and then perform the desired operation. In this case, the terminal will give notifications or disable
the mobile network when the data usage exceeds the limit.
3.1.3
Hotspot and Tethering
Wi-Fi Hotspot
After connecting the terminal to the mobile network, you can create a hotspot to offer internet
connection to other devices. To configure the Wi-Fi hotspot, do as follows:
1.
Tap Network & Internet > Hotspot & tethering > Wi-Fi Hotspot, and then enable the hotspot.
2.
Tap Set up Wi-Fi hotspot to set the Network name, Security and Password, and then tap SAVE
.
After configuring the Wi-Fi hotspot, you can quickly access the Hotspot through the Hotspot
