Hytera PD68X, Руководство пользователя

Страница: 26 / 49

Manner Operation
Incoming List / Missed List .
2. Select the target group contact, and then press the
OK/Menu key.
3. Select Call Type , and then select Broadcast Call .
4. Press or press and hold the
PTT
key to initiate the
call.
ReDial/BackDial
Call Log
1. From the home screen, press or (if
preprogrammed as the ReDial or BackDial key).
2. Select the target group contact from the list, and then
press the OK/Menu key.
3. Select Call Type , and then select Broadcast Call .
4. Press or press and hold the PTT key to initiate the
call.
Receiving a Broadcast Call
When you receive a broadcast call, the radio displays . The call is
established automatically. In trunking mode, the radio displays after the
call is established successfully.
Ending a Broadcast Call
A broadcast call ends in any of the following cases:
l
The calling party ends the call.
l
The call duration exceeds the period preset by your dealer.
l
A preemptive or emergency call interrupts the call.
l
The base station signal is lost.
Include Call (Trunking Only)
An include call is a call initiated to another group in call hang time of an
ongoing group call, so that the group joins the ongoing call. The radio must
be authorized by your dealer for you to initiate an include call.
For operations of the include call, see "Group Call" on page 13.
Analog Call (Conventional Only)
In conventional mode, you can initiate or receive a call on an analog
channel with or without signaling.
Call Without Signaling
A call without signaling is a call initiated to all other users on an analog
channel without signaling.
To initiate a call without signaling, do as follows:
1. Rotate the Channel Selector knob to select the required channel.
2. Press and hold the
PTT
key, and speak into the microphone.
21