Mode
Manner
Operation
/
Incoming
/
Missed
>
Outgoing List
/
Incoming
List
/
Missed List
.
2. Select the target private
contact.
3. Press
or press and hold
the
PTT
key.
Receiving a Private Call
Conventional Mode
When you receive a private call, the radio displays
. The call is
established automatically.
Trunking Mode
When receiving an Off Air Call Set-Up (OACSU) private call, you can
listen to it without any operation.
When receiving a FOACSU private call, press
or press and hold the
PTT
key to answer the call. After the call is established successfully, the radio
displays
.
Ending a Private Call
A private call automatically ends when the call hang time expires.
In trunking mode, a private call also ends in any of the following cases:
l
The calling or called party ends the call by pressing the
End
key or
preprogrammed
Clear Down
key.
l
The call duration exceeds the period preset by your dealer.
l
A preemptive or emergency call interrupts the call.
l
The base station signal is lost.
Phone Call
In conventional mode, you can initiate or receive a call to or from a Public
Switched Telephone Network (PSTN) terminal. The One-Key Connect
feature must be enabled by your dealer for you to initiate or receive a
phone call in conventional mode. In trunking mode, you can initiate or
receive a call to or from a PSTN or Private Automatic Branch eXchange
(PABX) terminal.
Initiating a Phone Call
The following table describes how to initiate a phone call in conventional
mode and trunking mode.
Mode
Manner
Operation
Conventional Contact List
1. Go to
Menu
>
Phone
>
DTMF
Keypad
, and then select
Enable
.
2. Press
to transmit the connect
code.
16
