The radio displays
,
, and
for an outgoing private call,
group call, and all call respectively.
Receiving and Responding to a Call
When receiving a call, you can listen to it without any operation.
The radio displays
,
, and
for an incoming private call,
group call, and all call respectively.
You can press and hold the
PTT
key and speak within call hang time.
Ending a Call
The radio will end a call when the call hang time expires.
Call on Analog Channel
You can initiate or receive a call on an analog channel with or without
signaling.
Call Without Signaling
A call without signaling is a call made to all the other users on an analog
channel without signaling.
To initiate a call without signaling, do as follows:
1. Rotate the
Channel Selector
knob to select the required channel.
2. Press and hold the
PTT
key, and speak into the microphone.
Call With Signaling
On an analog channel with signaling, you can make a call to a specific
contact on the channel. Do as follows:
1. Rotate the
Channel Selector
knob to select the required channel.
2. Press the
OK/Menu
key, and go to
Contact
>
Contact List
.
3. Select the target contact.
4. Press and hold the
PTT
key, and speak into the microphone.
Message Services
The Message feature allows you to view, send, and delete messages.
Viewing a Message
To view received messages or sent messages, do as follows:
1. Press the
OK/Menu
key, and then go to
Message
>
InBox
/
OutBox
>
Inbox List
/
Outbox List
.
2. Select the required message.
Sending a Message
You can send a message or a quick text message, forward a message from
the InBox or OutBox, and resend a message from the OutBox.
11
