Hytera HP6 0X, Руководство пользователя

Страница: 22 / 33

Supplementary Features User Manual
17
7.3.3 Lone Worker
The Lone Worker feature allows the radio to automatically send an emergency alarm to your companion or the control
center in either of the following scenarios:

You do not operate the radio within the preset time.

The radio does not transmit voice within the preset time.
You can press the keys, rotate the knob, or transmit voice to exit the emergency mode.
To enable this feature, press the preprogrammed
Lone Worker
key.
7.4 Scan
The Scan feature allows you to listen to activities on other channels, keeping track of your team members. With this
feature enabled, the radio scans according to the scan list. The LED indicator flashes orange slowly. When detecting
activities on a channel, the radio stays on the channel. The LED indicator glows green.
To enable this feature, press the preprogrammed Scan key.
If you do not want to hear activities on the channel, press the preprogrammed Nuisance Temporary Delete
key to remove the channel from the scan list temporarily.
7.5 Positioning
The Positioning feature allows the radio to collect its location information through GPS. This feature is enabled by your
dealer.
This feature applies only to radios with GPS.
7.5.1 Voice w/Location
The Voice w/Location feature allows the radio to report its location information to the dispatch station when initiating a
private call, a group call, or an emergency call.
This feature is enabled by your dealer, and configured in either of the following ways:

When you press and hold the PTT key to transmit voice, the radio reports its location information at the same
time.

When you press and hold the PTT key to transmit voice, the radio reports its location information at regular
intervals.