Hytera HM78X, Руководство пользователя

Страница: 61 / 67

54

Press the preprogrammed Horn & Lights key.
8.17 Emergency Erase Data
The Emergency Erase Data feature allows the radio to erase encrypted data in case of emergency, so as to prevent
unauthorized access. When erasing the data, the radio stops voice and data services and returns to the home screen.
If this feature is enabled by your dealer, the encrypted data can be erased in the following cases:

Press the P1 key and then the PTT key (within 1.5s) for two times, and then press the P1 key again.

When the radio is killed, the data in the radio will be erased automatically.
8.18 Stun, Revive, and Kill
8.18.1 Conventional Mode
The Kill feature allows you to send a command to a private contact to disable the radio. The killed radio can be
monitored remotely, but is deprived of other features The radio can only be revived by reprogramming through the
programming software or the Radio Enable command.
You can enable the radio of a private contact remotely and allow it to be used normally.
8.18.2 Trunking Mode
When the radio is stunned by the dispatch station or trunking system, the radio displays "Radio Stunned". In this
case, the radio cannot initiate or receive any network service (including calls and short messages), but retains
features such as registration, revive, kill, and authentication. A stunned radio can restore to normal use when
receiving the revive command from the dispatch station or trunking system. Then the radio displays "Revive
Successful".
When the radio is killed by the dispatch station or trunking system, the radio displays "Radio Killed". In this case,
the radio is incapable of any function except power-on/off. To restore normal use, send the radio back to the
Company.
The Stun, Revive, and Kill features are enabled by your dealer by default and triggered by the dispatch station or
trunking system.