45
To derive optimal communication quality, it is recommended to use the BT devices approved by the
Company.
If BT earpieces of other companies are used, you must use them with the wireless ring PTT of the
Company. Otherwise, the earpieces cannot transmit
To enable or disable the BT feature, do either of the following:
Press the preprogrammed
BT
key
Go to
Menu
>
BT
, and then press the
OK/Menu
key.
After this feature is enabled, the LED indicator flashes blue every three seconds.
The BT feature applies only to radios with the BT module.
8.6.1 Connecting a BT Device
Turn on the BT device and enter the pairing status. Refer to the accessory manual for details.
Search and connect to the BT device.
Go to
Menu
>
BT
>
Manual Search
>
Match PTT
/
Match Earphone
, enter the MAC address, and then
press the
OK/Menu
key.
Go to
Menu
>
BT
>
Auto Search
, select the BT device from the detected device list, and then press the
OK/Menu
key.
After the radio is connected to the BT device, the LED indicator of the radio flashes blue every 1.5 seconds.
8.6.2 BT Audio Switch
With the BT device connected, you can press the preprogrammed
BT Audio Switch
key to switch the audio output
device between BT earpiece and the radio.
8.6.3 Setting the BT
To change the BT name, go to
Menu
>
BT
>
My Device
>
BT Devices Name
, enter the new name, and then
press the
OK/Menu
key.
To set visibility, go to
Menu
>
BT
>
My Device
>
Always Detected
, and then press the
OK/Menu
key to
enable the feature.
Other BT devices can detect the radio.