28
6.6.3 Ending a Phone Call
Conventional mode
A phone call ends in either of the following cases:
The calling party hangs up.
The called party presses the
P6/End
key (with the One-Key Connect feature enabled) or enters the disconnect
code.
Trunking mode
A phone call ends in any of the following cases:
The calling party presses the
P6/End
key or places the palm microphone back to the hanger.
The call duration preset by your dealer expires.
The base station signal is lost.
A preemptive or emergency call interrupts the call.
The calling party changes the contact with the Clear Down feature enabled.
6.7 Call on Analog Channel (Conventional Only)
6.7.1 Call without Signaling
On an analog channel without signaling, you can initiate a call to all the other users on the channel. Do as follows:
1.
Rotate the
Smart
knob to select the channel.
2.
Press and hold the
PTT
key on the palm microphone.
6.7.2 Call with Signaling
On an analog channel with signaling, you can initiate a call to a specific contact on the channel. Do as follows:
1.
Go to
Menu
>
Contact
>
Favorite/Contact
, or press the preprogrammed
Contact List
key.
2.
Select the contact.
3.
Press and hold the
PTT
key or the preprogrammed
One Touch Call
key.
