26
6.4.3 Ending a Broadcast Call
A broadcast call ends in any of the following cases:
The calling party presses the
P6/End
key or places the palm microphone back to the hanger.
The call duration preset by your dealer expires.
The base station signal is lost.
A preemptive or emergency call interrupts the call.
The calling party changes the contact with the Clear Down feature enabled.
6.5 Include Call (Trunking Only)
An include call is a special group call during which another group is invited during the call hang time. An include call
has the same Talk Priority and Clear Down feature as a group call.
The Include Call feature is enabled by your dealer.
For operations of initiating, receiving, or ending an include call, see
6.6 Phone Call
A phone call is a call made from the radio to a phone through a repeater after the repeater accesses the PSTN/PABX
system through a PSTN/PABX gateway.
6.6.1 Initiating a Phone Call
6.6.1.1 Conventional Mode
Through Contact List
Press the preprogrammed
Contact List
or
Favorite Contact List
key, or go to
Menu > Contact/Favorite
.
Select the phone contact.
Press and hold the
PTT
key.
Through Manual Dialing
With the phone call dial permission enabled by your dealer, do as follows:
On the home screen, enter the phone ID, and then select
DTMF Dial
.
Press and hold the
PTT
key.
The phone ID must be complied with the dialing rules. For details, consult your dealer.
