Hyster H40-60XT Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 180

background image

Checks With the Engine Running

WARNING

FASTEN SEAT BELT
If Lift Truck Tips Over

• DO NOT Jump – Stay On Truck

• Hold Firmly To Steering Wheel – Brace

Feet – Lean Forward And Away From
Impact

The seat belt is installed to help the opera-
tor stay on the truck if the lift truck tips
over. IT CAN ONLY HELP IF IT IS FAS-
TENED.

The operator must be aware that the lift truck
can tip over. There is a great risk that the oper-
ator or someone else can be killed or injured if
trapped or hit by the truck as it tips over. The

risk of injury can be reduced if the operator stays on the
truck.

If the truck tips over, do not jump off!

THE SEAT BELT AND HIP RESTRAINT bracket provides a
means to help the operator keep the head and torso sub-

stantially within the confines of the truck frame and over-
head guard if a tipover occurs. This protection system is
intended to reduce the risk of the head and torso being
trapped between the truck and the ground, but it can not
protect the operator against all possible injury in a tipover.

Make sure that the area around the lift truck is clear before
starting the engine or making any operational checks. Be
careful when making the checks. If the lift truck is stationary
during a check, apply the parking brake and make sure the
direction control is in

NEUTRAL

. Proceed carefully.

Check the operation of the following functions as described
in the

Maintenance

section:

•

Check the operation of the horn, gauges, and indicator
lights.

•

Operate the

LIFT, TILT

, and auxiliary functions to check

for correct operation of the mast, carriage, and attach-
ments.

•

Check the operation of direction control lever and accel-
erator pedal.

•

Check the operation of the service brakes and parking
brake.

Operating Procedures

55

«
...
55
56
57
58
59
...
»

Содержание H40-60XT





















































































































































































Отзывы:

Нет отзывов

Похожие инструкции для H40-60XT

Бренд: HANGCHA Страницы: 73

Бренд: UniCarriers Страницы: 158

EcoMaxx ECO-FD 18

Бренд: Starke Страницы: 48

Бренд: Still Страницы: 106

Бренд: Yale Страницы: 76

Бренд: Hyster Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды