RS-485 Serial Interface Receptacle with PCB
16
806710
Field Service Bulletin
Powermax65/85/105/125, Powermax65/85/105 SYNC
Attach the rear panel of the plasma power supply
1.
Put the fan side of the plasma power supply on a flat surface.
2.
Push the rear panel
onto the bottom of the plasma power supply.
3.
Install the screws
that attach the rear panel to the bottom of the plasma power supply. Some
models have 2 screws on the bottom of the plasma power supply, and other models have
3 screws on the rear panel instead.
4.
Put the plasma power supply in an upright
position.
5.
Put the end panel bracket
into position. If
your model requires screws to attach the end
panel bracket, install the 2 screws
that you
removed previously.
1
2
1
2
1
2
3
4
4
3
4
