Hypertherm EcoSift, Руководство оператора

Страница: 71 / 188

Preventi
ve maintenance
Preventive maintenance
EcoSift Operator Manual 809500 71
Replace the recycled-abrasive collection bag
Required parts, tools, and materials
1-16445 Recycled-abrasive collection bag
Forklift
Keep spare parts available so that they are ready when required. To order parts, refer to the
Parts
section,
which begins on page 113.
Do this task when the EcoSift is not operating.
1. Disconnect the rubber straps on the EcoSift to release the bag loops on each corner.
2. Use a forklift to move the pallet with the abrasive collection bag.
3. Put the pallet on the floor and use the forklift to lift the abrasive collection bag off of the pallet.
4. Put the empty pallet on the EcoSift scale.
5. Put a recycled-abrasive collection bag on top of the pallet.
6. Put the neck of the bag through the bag support.
7. Fold the top of the bag over the support.
WARNING
• Lifting must be done by a trained operator.
• Obey all work site-safety requirements, the safety instructions for the lifting equipment, and the
safety information in this manual.
• Misuse of lifting equipment can cause the load to become unstable, which can cause property
damage, personal injury, or death.
Obey local regulations when discarding parts, materials, abrasive, and wastewater. Refer to
Recycling and end of product life
on page 110.
Repair or replace parts identified in the preventive maintenance schedule or if the parts are
defective, deteriorated, corroded, or damaged.
• The maximum weight that the recycled-abrasive collection bag can hold is 454 kg (1,000
pounds).
• Use lifting equipment that can safely lift and move the bag.