Hypertech POWER PROGRAMMER III Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 31

Hypertech POWER PROGRAMMER III Скачать руководство пользователя страница 25

24

What To Do Before Taking Your Vehicle In For Service

If you take your vehicle to a dealer or mechanic for service,

you must first remove the Hypertech Power Tuning and restore
the stock programming. This is because diagnostic devices
expect to find stock calibrations and will often overwrite the
program if the latest calibration is not found in the computer
memory. This will result in the loss of your Hypertech Power
Tuning data. The Hypertech Power Programmer has an internal
security system that allows its Power Tuning program to be
installed in only one vehicle at a time. In order to maintain
the most current calibrations for your vehicle, the Power
Programmer is designed to allow you to restore the stock tuning
before you take your vehicle in for service so that the service
technician can upgrade your stock calibrations. After the service
is complete, you can reinstall your Hypertech Power Tuning.
If you have any questions related to service issues, please call
Hypertech at 901-382-8888.

* Power Tuning products are Power Chips, Power Modules,

Power Tuning Modules, and Power Programmers

PRODUCT WARRANTY

Factory Direct Limited Lifetime Warranty

All HYPERTECH Power Tuning Products* are warranted

against defects in materials or workmanship. Hypertech’s
liability under this warranty shall be limited to the prompt
correction or replacement of any defective part of the product
which HYPERTECH determines to be necessary. This Limited
Lifetime Warranty is to the original purchaser for as long as
he or she owns the vehicle on which the product is originally
installed, providing all the information requested is furnished.
You must retain a copy of your original sales invoice or receipt.
Without proper documentation, a service fee will be applied.

Resold units are NOT covered under this warranty.

«
...
23
24
25
26
27
...
»

Содержание POWER PROGRAMMER III
































Отзывы:

Нет отзывов