Hypersen Technologies Co., Ltd.
HPS-FT-USER V1.8
24
/
38
3. Open the
Parameter setting
window.
4. Then you can set the Kalman filter, low pass filter, median filter, moving average filter
and sensor coordinate rotation function.
5. Set according to the parameters specified in the manual, and then click the
Set
button
to make the settings take effect immediately.
6. If you want the settings to remain valid after shutdown, after completing the setting and
making the settings take effect, you can close the
Para Setting
window and click the
Save user
setting
button on the
Advanced setting
menu, and then the relevant parameters will remain valid
after shutdown.
5.1.3 Port setting
Steps: 1. Connect the host software to the sensor according to 5.1.1.
2. Click the
Stop
button to stop the data acquisition and then click the
Advanced setting
menu.