Hypermedia HG-3000, Руководство по эксплуатации продукта

Страница: 77 / 122

Hypermedia Systems
Configuring LCR
Release 5.3 (June 2013)
67
4.6 Filters
Filters enable consistent, automatic management of phone numbers before they are
routed.
An IN filter changes the destination number before the list of rules is processed.
An OUT filter changes the destination number after the list of rules has been
processed and the destination group has been chosen. The process is identical for
both.
To create a Filter:
1.
From the HMC navigation pane’s LCR branch, click either the
IN or OUT
Filters sub-branch. The Filters screen is displayed.
Figure 68. LCR Filters Screen
2. Configure the following for up to eight filters:
Trim Left
From the dropdown menu, select the amount of digits that will be deleted from
the beginning of the destination number.
Add Left
Optionally enter the numeric prefix that will be added to the beginning of the
destination number.
Match Condition
Optionally enter the exact expected numeric prefix with which the dialed
number should begin, for this filter to be applied.
3. Click Save Settings .
4.
From the HMC navigation pane’s LCR branch, click the
Groups sub-branch.
The Groups screen is displayed.