background image

Disclaimer:

 While every effort has been made to ensure that the information in this document is correct and 

accurate, users of Hynds product or information within this document must make their own assessment of 

suitability for their particular application. Product dimensions are nominal only, and should be verified if 

critical to a particular installation. No warranty is either expressed, implied, or statutory made by Hynds 

unless expressly stated in any sale and purchase agreement entered into between Hynds and the user.

TSS S1.2IMI 

Version: 1.0 

December 2021

Scan for more  

information

Contents

1. Safety Considerations ................................................... 2

2. Installation Instructions ................................................ 2

3. Maintenance Instructions ............................................. 7

 

Technical Support Sheet - Installation & Maintenance Instructions

Smarterwater

®

  

Stormwater Manhole Sensor 

This document provides step by step installation and maintenance guidance for 
the Hynds Smarterwater

®

 Stormwater Manhole Sensor. 

Содержание Smarterwater Stormwater Manhole Sensor









Отзывы: