HygroMatik WL-ROL 160-1200 Series, Руководство пользователя

Страница: 60 / 76

Page 60
» Press the arrow keys to set
time of delay.
» Confirm the selection with . The
program jumps back to the main
menu.
11.6.21 Stand-by-Input IN
SB
(Release contact)
» Press the arrow keys to
select if relay input should be active
or inactive.
» Confirm the selection with . The
program jumps to submenu "20B".
» Press the arrow keys to set
the switching direction.
N.O. CONTACT = The input functions as a
normally open contact.
N.C. CONTACT = The input works as a nor-
mally closed contact
» Confirm the selection with . The
program jumps to submenu "20C".
» Press the arrow keys to set
the time of delay
0 Sec = no delay
(see note at the end of the chapter)
» Confirm the selection with . The
program jumps back to the main
menu.
11.6.22 Set start delay
Output activation / delay:
In order to avoid pipeline damage due to
"water hammer", a delay of 3 seconds
between pump on (or off) and solenoid valve
on (or off) and a delay of 2 seconds between
pump on (or off) and pressure pump on (or
off) has been set at the factory.
19C INPUT DELAY
00Sec
20 STAND BY / INPUT
21 PUMP DELAY
20A STAND BY IN
ENABLED
20B STAND BY IN
CONTACT N.O.
20C INPUT DELAY
00Sec
20 STAND BY/ INPUT
21 PUMP DELAY
21A PUMP DELAY
00 sec