Station 3 desk
hy there! let‘s
assemble
assembly instruction
1
Unpack the station and place it on it‘s
back on a table.
4
7
Use the provided screws and TORX-Key to
attach the base to the column.
Fill the canister with disinfectant and
insert the batteries. Close the lid and turn
the dispenser on, using the switch on the
right side.
Attach the metal hood to the column and
place the melamine tray in the slot.
2
Let the buttom hang over the edge. Insert
the wooden dowels into the middle holes.
5
8
9
Fasten the screws by turning clockwise.
Beware not to overtighten.
3
Unpack the base and attach by aligning
the holes with the dowels.
6
Place the assembled column on the table
and attach the dispenser.
www.hygn.me/service
WSP Wagner-Service-Partner GmbH & Co. KG . Niederlassung Berlin . Waisenstraße 30 . 10179 Berlin
Fon +49 30 255 58 11 66 . [email protected] . hygn.me
