EN-GB - 25
HYENA E-BIKE SYSTEMS
10.
Cleaning
• To avoid an electric shock when cleaning the e-bike, disconnect the AC plug from the
electrical socket and the charging plug from the battery.
• Do not immerse the assist system or any individual e-bike component in water.
• Do not clean any assist system component with pressurised water.
• Only clean the product with a water-dampened soft cloth.
• Do not clean any assist system component with any detergent or organic solvent.
• The system is designed to operate in rain and other adverse weather conditions.
However, damage due to pressure washing or other heavy cleanings may void the assist
system warranty.
11.
Disposal
• The e-bike assist system drive unit including the motor, driver, battery, speed sensor,
console, wiring, accessories and packaging should be disposed of in an environmentally
correct manner according to local rules.
• Do not dispose of e-bikes and their components with household waste.
• About rules in EU: In accordance with Directive 2012/19/EU and Directive 2006/66/EC
respectively, electronic devices that are no longer usable and defective/drained batteries
must be collected separately and recycled in an environmentally friendly manner.
This symbol is only valid within the European Union.
Follow local regulations when disposing of used batteries and other
electrical parts.
If you are unsure, consult the place of purchase or a bike retailer.
⚠
WARNING
Failure to follow the instructions in this section may result in damage to the components
on your e-bike and will void your warranty, but, most importantly, may result in serious
injury or death.
