Hydrotechnik 3402-CX10-D100-000 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 48

Hydrotechnik 3402-CX10-D100-000 Скачать руководство пользователя страница 38

USE WITH A MULTISYSTEM MEASUREMENT

INSTRUMENT

HySense

®

CX 197

38

ENG

In the first three windows, the direct measurement values for a particular time
stamp are saved. The fourth window displays the oil with its oil parameters that
was selected for the measurement. Windows 5-8 reflect the limits set at the time
of the measurement.
Use the F1 key “DELETE” to delete individual measurements; use the F3 key
“Reset” to delete all measurements for the metering point by resetting the table.
If you are in online mode, if

you press the F5 key, the “SAVE” function appears

that you can use to record a new measurement value.

5.2.6 Exporting the measurement data

With the measurement instrument, it is possible to export the saved
measurement values in the measurement value table. Here, the measurement
values are saved in a text file on a USB stick. This way, the data can be
transferred to a PC and there can be a graphic display of the measurement
data.

To start the data export, go to the measurement instrument's main menu and
press the F4 key (“USTICK”) under Save in the blue field. The mode is set to
“Save” and the data type “CX 197 Series (TXT)” is selected. Then, by selecting
the metering point under “Selection,” you can specify that its measurement
value table will be saved on the USB stick under the same name selected.

Figure 29: Measurement value table

«
...
36
37
38
39
40
...
»

Содержание 3402-CX10-D100-000

















































Отзывы:

Нет отзывов