Hydronix Hydro-MIX XT Skid, Руководство по установке

Страница: 14 / 25

Mechanical Installation Chapter 2
14 Hydro-Mix XT Skid Installation Guide HD0927 Rev: 1.0.0
3 Assembly of the Hydro-Mix XT Skid
The Hydro-Mix XT Skid requires the user to assemble the system to match their requirements.
The HMXT Skid Adjustment bars and the HMXT Skid M6 studs are pre-installed using Loctite 290
to ensure they are flush with the underside of the Sensor Plate. If they are removed Loctite 290
must be reapplied after thorough cleaning of the threads.
The Hydro-Mix XT Skid kit comprises of the following components:
1. HMXT Skid Sensor Plate
2. HMXT Skid Mounting Plate
3. HMXT Skid M12 Adjustment Bars x4
4. HMXT Skid M6 Studs x6
5. HMXT Skid Clamp Plate
6. HMXT Skid Belt Extension Plate (Optional)
7. HMXT Skid Belt Extension Mounting Plate (Optional)
8. HMXT Skid Belt Extension Clamp Plate (Optional)
9. HMXT Skid Belt Extension M12 Adjuster Bars x 2 (Optional)
10. Hydro-Mix XT Skid M12 Nuts x12
11. Hydro-Mix XT Skid Extension Plate M12 Nuts x6 (Optional)
12. M6 Nuts x18
13. M6 end caps x6
14. M10 80mm Bolts x6
15. M10 Spring washers x6
16. M10 Nuts x6
8
7
9
6
2
3
1
13
4
12
10
11
5
Square Bar
(User Supplied)
14
15
16
14
16
15
Figure 3: Hydro-Mix XT Parts