Hydronix Hydro-Hub, Руководство пользователя

Страница: 69 / 75

Calibration Chapter 7
Hydro-View / Hydro-Hub User Guide HD0864 Rev 1.0.0 69
Figure 119: Calibration Graph Displaying All Available Measurement Modes
See the appropriate sensor user guide for advice on which Measurement Mode to
select.
24. Save any changes made to the calibration.
25. Once a calibration has been completed successfully the data can be written to the
sensor. All available Measurement Mode coefficients will be updated and if the sensor
supports the facility the calibration points (Unscaled and Moisture %) will also be
transferred to the sensor.
Select write to sensor to update the sensor.
Once updated the current calibration data will be available in the ‘Sensor Calibration’ tab.
Figure 120: Sensor Calibration Tab
4 Copy a Calibration from the Sensor to the Database
If the connected sensor’s calibration data is not stored in the Hydro-Net database it is possible to
copy the data points and coefficients from the sensor to the database. This enables the user to
make a copy of a calibration created on a different version of Software. As the data in the Sensor
Calibration tab is read only, if the calibration requires updating or adjustment the data has to be
copied to the database. Once the calibration is updated to the database it can be modified.
To update the calibration open the Sensor Calibration Tab and select Update Calibration.
Once updated the calibration data can be viewed in the available calibration tab by selecting it from
the calibration selector.