Hydromatic FlexLine FLH03, Руководство пользователя

Страница: 10 / 56

Page 10
4. Functional Description and
Device Composition
4.1 Mode of Action
The immersion heater principle
Depending on the output rating, one, three or
six heater elements are arranged within a
closed cylinder. The FlexLine humidifiers
FLH80 and FLH100 combine two steam cylin-
ders in one housing.
Examplary given, the figure below shows the
heater element and other main components of
a FlexLine steam generator model with one
steam cylinder.
The cylinder(s) are filled with either tap water
of varying quality, fully desalinated water or
partially softened water.
The heat introduced by the heater elements
heats up the cylinderwater to approx. 100 °C
(212 °F), transforming the water into steam
with a temperature of approx. 100 °C (212 °F)
This steam is virtually mineral-free and germ-
free.
When fully desalinated water is used, the cy-
linder water is almost totally clear of minerals.
This situation guarantees a long lifetime of the
cylinder(s) and the heater element(s), since
virtually no hardeners will fall-out and no min-
eral deposits will occur. Such, the number of
inspections and/or maintenance operations
required will be reduced to a minimum.
When tap water is used for operation, some of
the minerals dissolved in the water are likely to
settle in the cylinder in form of solids of various
compositions. However, most of the solids are
flushed out by cyclic blow-down with the help
of a heavy-duty blow-down pump.
Control switch
Display
Main
contactor
Blow-down
pump
Cable
bushings
Waste water
outlet
Main board
(control)
Connector for heater
element wiring
Solid state relay
on heat sink
Water inlet
Solenoid valve
Cylinder base
Heater element
Steam cylinder
Steam hose
adapter
Steam exit
Thermo switch
Level control